Products

Factory supplied Redispersible Vae Powder Rdp for Bonding Mortar

Short Description:

RDP 2000  is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms stable emulsion. This redispersible powder is especially recommended for blending with inorganic binders such as cement, gypsum and hydrated lime, or as a sole binder for the manufacture of construction adhesives.


  • Model: RDP 2000 
  • Product Detail

    Product Tags

    Inside the past few years, our business absorbed and digested advanced technologies equally at home and abroad. Meanwhile, our corporation staffs a workforce of experts devoted to your progress of Factory supplied Redispersible Vae Powder Rdp for Bonding Mortar, Our merchandise are widely recognized and dependable by users and can meet continuously building economic and social needs.
    Inside the past few years, our business absorbed and digested advanced technologies equally at home and abroad. Meanwhile, our corporation staffs a workforce of experts devoted to your progress of CAS 24937-78-8, China Rdp, Rdp Powder, Redispersible Emulsion Powder, Redispersible Polymer Powder, Redispersible Rubble Powder, Vae Powder, All these products are manufactured in our factory located in China. So we can guarantee our quality severely and availably. Within these four years we sell not only our merchandise but also our service to clients throughout the world.

    Redispersible Polymer Powder

    Introduction

    RDP 2000 improves adhesion, flexural strength, abrasion resistance and workability of modified compounds such as tile adhesives, self-leveling compounds and gypsum based compounds. It is therefore compatible with mortar additives used to achieve special processing characteristics.
    RDP 2000 contains a fine, mineral filler as anti-block agent. It is free of solvents, plasticizers and film-forming aids.

    Indicators

    Product Specifications

    Solid Content >99.0%
    Ash content 10±2%
    Appearance White Powder
    Tg 5℃

    Typical Proerty

    Polymer Type VinylAcetate-Ethylene copolymer
    Protective Colloid Polyvinyl Alcohol
    Bulk Density 400-600kg/m³
    Average Particle Size 90μm
    Min Film Forming Temp. 5℃
    pH 7-9

    Construction:

    1.0Exterior Thermal Insulation System(EIFS)

    Tile Adhensive

    2. Grouts/Joint Mixture

    3. Binding Mortar

    4.Water-proofing/Repairing Mortars

    jufuchemtech (32)

    jufuchemtech (22)

    jufuchemtech (35)

    Package&Storage:

    Package: 25kg paper plastic bags with PP liner. Alternative package may be available upon request.

    Storage: Shelf-life time is 1 year if kept in cool, dried place.Test should be done after expiration.

    jufuchemtech (34)
    jufuchemtech (20)


  • Previous:
  • Next:

  • Write your message here and send it to us